liberty 404 pump specs

2 min read 02-02-2025

The Liberty 404 pump is a popular choice for various applications, but finding concise, reliable specifications can be challenging. This comprehensive guide delves into the details of the Liberty 404 pump, providing you with the information you need to make informed decisions. We'll cover key specifications, performance characteristics, and common applications. Note that specific specifications might vary slightly depending on the model year and any optional configurations, so always consult your pump's documentation for precise details.

Key Specifications of the Liberty 404 Pump

While precise specifications require referencing the specific Liberty 404 pump model and documentation you possess, we can outline the general parameters typically associated with pumps of this type. Remember to always verify with the manufacturer's materials or your pump's data plate.

Performance Parameters:

Flow Rate (GPM): This varies significantly depending on the specific Liberty 404 model and operating conditions (pressure, viscosity, etc.). Expect a range of GPM, which will be clearly specified in the pump's documentation.
Head Pressure (PSI or feet): The maximum pressure the pump can generate also depends on the model and operating conditions. This is a critical specification to match your system's requirements.
Power Requirements (HP or kW): The electrical power needed to operate the pump, indicated in horsepower or kilowatts. This will influence your electrical system's capacity needs.
Efficiency: Expressed as a percentage, this indicates how efficiently the pump converts electrical energy into hydraulic energy. Higher efficiency means lower operating costs.

Physical Characteristics:

Dimensions (Length, Width, Height): These dimensions are crucial for installation space planning. Check the manufacturer's documentation for exact measurements.
Weight: The weight of the pump affects installation and handling requirements.
Material: The construction materials (e.g., cast iron, stainless steel) impact durability, corrosion resistance, and suitability for specific fluids.
Port Sizes (Inlet & Outlet): The size of the inlet and outlet connections determines the compatibility with your piping system. This is often expressed in inches or millimeters.

Operational Parameters:

Speed (RPM): The rotational speed of the pump's impeller.
Operating Temperature Range: The temperature range within which the pump can operate safely and efficiently.
Fluid Compatibility: The types of fluids the pump is designed to handle. This is critical to avoid damage or inefficiencies.

Finding Your Specific Liberty 404 Pump Specs

To obtain the precise specifications for your Liberty 404 pump, you should:

Locate the pump's data plate: This plate, typically affixed to the pump itself, provides crucial information, including model number, serial number, and key specifications.
Consult the manufacturer's documentation: The manual or technical specifications accompanying the pump will provide the most detailed and accurate information. You may find this online through the manufacturer's website, using the model number found on the data plate.
Contact the manufacturer or a qualified dealer: If you cannot locate the documentation, contacting the manufacturer directly or a reputable dealer can help you obtain the required specifications.

Applications of the Liberty 404 Pump

The Liberty 404 pump, based on its general capabilities (again, verify using your specific model's specs), is likely suited for a range of applications including:

Industrial Processes: Transferring various fluids within industrial settings.
Agricultural Irrigation: Pumping water for irrigation systems.
Water Treatment: A component in water treatment facilities.
Wastewater Management: Handling wastewater in various applications.

This guide provides a framework for understanding Liberty 404 pump specifications. Always prioritize consulting the manufacturer's documentation and data plate for precise information relevant to your specific pump model. Remember that safety and efficient operation depend on understanding and adhering to the manufacturer's recommendations.